The only pocket meter that directly measures conductivity in 0.12ml sample. No need for a beaker to calibrate your meter or measure a sample. Just place few drops of the standard or sample onto the sensor. This procedure saves you time and prevents wasting your precious sample.
- Minimum sample volume: 0.12ml
- Up to 3 calibration points
- Conductivity and temperature display
- Auto range & Auto calibration
- Auto standard recognition: 1413µS/cm, 12.88mS/cm, 111.8mS/cm
- Auto temperature compensation: 2%/ºC fixed
- Temperature calibration: 5 to 40.0 ºC
- Auto power off: 30 mins.
- Low battery indicator
- IP67 Rating dust & waterproof
- Replaceable sensor
- 400 Hours battery life: continuous use without backlight
- Materials: ABS epoxy body & titanium coated with platinum black sensor
- Display: custom (monochrome) LCD with backlight
- Operating conditions: 5 to 40°C, 85% or less relative humidity
- Warranty: 2 years - meter, 6 months - sensor
- Packed in handy carrying case
- Supplied with 1413µS/cm & 12.88mS/cm conductivity standards (14 ml each), conditioning solution (4ml), 2 x CR2032 batteries, dropper, instruction and quick manuals
Specifications:
- Conductivity Ranges:
- 0 to 199 µS/cm: 1µS/cm
- 200 to 1999 µS/cm: 1µS/cm
- 2.00 to 19.99 mS/cm: 0.01 mS/cm
- 20.00 to 199.99 mS/cm: 0.1 mS/cm
- Resolutions (Range):
- 1 μS/cm (0 to 199 μS/cm)
- 0.01 mS/cm (0.20 to 1.99 mS/cm)
- 0.1 mS/cm (2.0 to 19.9 mS/cm)
- 1 mS/cm (20 to 199 mS/cm)
- Other specifications:
- Accuracy: ±2% F.S. ±1 digit
- Power: Two CR2032 batteries
- Weight: 45 g
